Completion Wireline Services

ABOUT RANGER COMPLETION WIRELINE SERVICES

We rise to the challenge

Ranger’s Completion Wireline Services rises to today’s challenges of increasing operational efficiencies associated with pumpdown, plug and perf operations.  Ranger offers the scale and footprint with experienced crews, state-of-the-art technology, and standard operating procedures to deliver reliable wireline operations and high run efficiency.

Ranger Completion halfback wireline truck
Ranger Completion halfback wireline truck

WIRELINE PERFORATING SERVICES

Ranger uses all modern, fit-for-purpose half-back wireline trucks with amenities for crew and customers. We use state-of-the-art addressable gun systems, serialized and disposable setting tools, and ballistic releasing tools to maximize safety, increase reliability, and maximize plug and perf operational efficiency.

  • Half-back truck for greater visibility and safer winch operation
  • 10K, 12.5K and 15K pressure control equipment
  • Factory assembled gun components for maximum reliability
  • Push in style detonator and addressable switch technology
  • Modular gun system can be assembled more quickly
  • Radio frequency safe detonators enable parallel frac operations
  • Risk mitigation with wellhead latch systems, ballistic and mechanical release systems, greaseless line, downhole tension tools, pre-job wireline/pump-down modeling, wireline safe acid
  • Integrated pressure pumping services for pump-down operations
Greaseless cable used in wireline completion services

GREASELESS CABLE

Ranger uses wireline covered with a polymer jacket for a cleaner, faster and safer operation. Conventional wireline requires pressure control operations using grease that can be messy on location.

  • Cleaner, safer, and environmentally friendly operations
  • Faster running speeds due to reduced friction coefficient in long laterals
  • Faster rig up time since grease injection system is not required
  • Extended reach with 40kft cables in long laterals
Greaseless cable used in wireline completion services
Lee Posilock well swap system used in ranger wireline completion operations
Lee Posilock well swap system used in ranger wireline completion operations

WELL SWAP SYSTEMS

Ranger uses innovative technology to allow remote operation of wellhead connections. The advanced systems replace legacy threaded connections between the pressure control equipment and the wellhead with a remotely operated connection for a much safer, more efficient operation.

  • Removes personnel from high pressure areas when making or breaking connections
  • Incorporates multiple safety redundancies to signal latch status
  • Enables frac and wireline simultaneous operations
  • Increases well swap efficiencies
Downhole cable head release and tension tools used in ranger wireline completion operations

DOWNHOLE CABLE HEAD RELEASE & TENSION TOOLS

Ranger provides additional risk mitigation services with downhole release tools and tension tools to help ensure safe operations

  • Addressable ballistic release tools and mechanical release tools can be run independently or in combination to protect the wireline and avoid complex fishing operations
  • Downhole tension tools improve pump down efficiency and speed while reducing risk and uncertainty in longer laterals.
  • Wireline and pump down modeling helps in pre-job prep and operational efficiency.
Downhole cable head release and tension tools used in ranger wireline completion operations
Ranger uses 2250 - 2500 HP pumps for pump down services in conjunction with their wireline completions
Ranger uses 2250 - 2500 HP pumps for pump down services in conjunction with their wireline completions

PUMP DOWN SERVICES

Ranger uses 2250 – 2500 HP quintuplex pumps including tier 4 emissions standards. Combining Ranger’s wireline perforating and pump down services maximizes safety and operational efficiency through integrated safety, quality and communications systems.

  • Integrated wireline perforating and pump down services
  • Operator controls pump from wireline unit for optimum communications
  • Common standard operating procedures and safety standards
  • Maximize safety and operational efficiency
  • More stringent emissions standards
  • Crew synergy with pump operators familiar with wireline operations

EQUIPMENT & SERVICES

  • Pump Down Perforating
  • Conventional Perforating
  • Addressable Switch Selective Perforating
  • Radio Frequency (RF) Safe Systems
  • Tubing Conveyed Perforating (TCP)
  • Coiled Tubing Conveyed Perforating
  • Wireline & Pump Down Modeling with Real Time Data Semblance
  • Greaseless Wireline Operations
  • Lee Posi Lock Remote Wellhead Connection Units
  • 10k and 12.5 pressure control equipment
  • Addressable Ballistic Release
  • Downhole Tension Tools
  • HHP quintuplex pumps
  • CAT 3512E (Tier IV) engine
  • CAT TH55-E70 transmission
  • Gardner-Denver power ends
  • GD SS fluid ends with 4-1/2” plungers
  • Custom AMI Controls
  • Pump down package
  • Cold weather kit
  • Wireline pump down modeling
  • Real-time monitoring
  • Backside pressure pumps
  • 2” & 3” 1502 certified treating

AVAILABLE LOCATIONS

Houston, TX – Headquarters

10350 Richmond Ave, Suite 550 Houston, TX 77042

713.935.8900

Andrews, TX – Fishing Services

2130 South US Hwy 385, Bldg. 1 Andrews, TX 79714

432.523.4420

Big Spring, TX – Well Services (Rigs | Fishing Services)

1203 Hwy 176 Big Spring, TX 79720

325.651.2162

Bowie, TX – Well Services (Rigs | Plug & Abandonment)

1604 TX-59 Bowie, TX 76230

940.872.1393

Denver City, TX – Well Services (Rigs | Fishing Services)

2753 Chisholm Trail Denver City, TX 79714

805.592.9128

Fort Worth, TX – Sales Office

777 Main, Suite 600 Fort Worth, TX 76012

817.887.8441

Kermit, TX – Well Services

312 East Hwy 302 Kermit, TX 79745

432.967.6896

Kilgore, TX – Well Services (Rigs | P&A)

6308 Hwy 42 North Kilgore, TX 75662

940.872.1393

Midland, TX – Plug & Abandonment

4601 S County Rd 1270 Midland, TX 79706

Midland, TX – Well Services

5805 East Hwy 80 Midland, TX 79706

432.571.8161

Midland, TX – Wireline Services

7100 West Interstate-20 Midland, TX 79706

432.400.3070

Odessa, TX – Fishing Services

2900 East I-20 Odessa, TX 79766

432.286.9140

Pleasanton, TX – Well Services (Rigs | Plug & Abandonment)

4541 CR 430 Pleasanton, TX 78064

830.469.1940

Wharton, TX – Well Services (Rigs | Plug & Abandonment)

2029 FM 1301 Wharton, TX 77488

979.532.1616

Artesia, NM – Fishing Services

301 Commerce Rd
Artesia, NM 88211

575.746.4326

Artesia, NM – Well Services

11383 Loving Hwy
Artesia, NM 88211

575.746.4326

Hobbs, NM – Well Services

5208 N Lovington Hwy
Hobbs, NM 88240

El Reno, OK – Well Services (Rigs | Rig Assist Snubbing)

4301 OK-66 El Reno, TX 73036

940.872.1393

Brighton, CO – Wireline Services

1660 CR-27 Unit A Brighton, CO 80603

720.307.8860

Ft. Morgan, CO – Well Services (CTU | Plug & Abandonment)

12809 Energy Road Ft. Morgan, CO 80701

970.867.2766

Milliken, CO – Well Services (Rigs | Plug & Abandonment)

3333 Center Dr Milliken, CO 80543

970.587.5813

Casper, WY – Wireline Services

1844 Welsh Ave Casper, WY 82604

307.200.0304

Gillette, WY – Plug & Abandonment

24 Union Chapple Road Gillette WY 82718

307.299.9747

Belfield, ND – Well Services

904 Chambers Ave Belfield, ND 58622

701.575.2800

Williston, ND – Well Services (Rigs | Plug & Abandonment)

14082 W Front St Williston, ND 55801

701.774.0127

Williston, ND – Wireline Services

511 22nd Ave. NE, Williston, ND 58801

701.264.5057

*Equipment may vary by location

LITERATURE

Interested in our products or services? Get in touch today!